Sensplorer Water Leak & Flooding Module

The Sensplorer Water Leakage/Flood Sensor monitors if any water leakage is present. It is used flood detection cable and spot-type water sensor with respect to specific requirement.

• Sensplorer water flood sensor with its very precise sensing technology generates almost no fake alarm.
• Sensplorer flood sensor cable and probes never get corroded by design. It never uses polarity on detection of water probes and leak sensing cables.
• The LCD screen on the module helps people to see the current flood situation in the field and to intervene immediately. It is connected to CAN bus of all types of Sensplorer Base Modules by using CAT5 / 6 UTP cable.
• The module receives its energy via this UTP connection, no seperate power supply is required. The maximum length of CAN bus can be extended up to 200 meters.However power injection module may be required depending on CAN bus length and the number of CAN modules.
• If the sensor value goes out of the range defined by the system admininistrator;
  1. Users sensor assigned, “if defined”, receive e-mail, SMS, phone call
  2. Sensplorer dashboard shows the status change on dashboard
  3. SNMP / Syslog servers ,”if defined”, receives the traps/messages
  4. SCADA or BMS systems, ,”if defined”, receives the traps/messages
  5. Sensplorer runs the specific rule(s) defined in case of this particular event
  6. All events and sensor’s values are stored in the sensor history database for logging or reporting purpose in the future