The Sensplorer 8-port Relay Output Module has 8 separate relay with NO(normally open) and NC(normally close) pinouts.
Module is connected to the Sensplorer Base Module via CAN expansion bus. Each relay output can directly drive the loads separately, or in higher current applications the relay output can also drive auxiliary coils that can handle high currents.
Relays are used to switch peripheral devices ON / OFF. User can assign name to each contacts. Sensplorer also provides to switch the devices ON-OFF from the Cloud and Mobile Apps.
Sensplorer base modules acts as an IOT gateway to exchange request-response commands in between apps and device driven by the Sensplorer’s relay. It is connected to CAN bus of all types of Sensplorer Base Modules by using CAT5 / 6 UTP cable.
The maximum length of CAN bus can be extended up to 200 meters.However power injection module may be required depending on CAN bus length and the number of CAN modules.
• Control and drives devices and loads
• Switch ON/OFF manually or automatically by the Sensplorer rules
• Cloud/Mobile App remote control on devices/loads
• 8 Relays with NO / NC pins
• Supports up to 5A @ 230 VAC on NO ports
• Supports up to 2A @ 230 VAC on NC ports
12V DC , max. 5 W
0 °C / +70 °C
-40 °C / +85 °C
DIN Rail /Wall Mount
158 x 86 x 60 mm
Contact resistance : max.62.5 mOhm Max.Load (resistive load) Normally Closed Side : 1A @250 VAC, 1A @30 VDC Normally Open Side : 2A @250 VAC, 3A @30 VDC