Sensplorer 12-port Digital Input Module

The Sensplorer 12-port Digital Input Module monitors digital outputs produced by other device and sensors in terms of their status.

A digital output can be one of in two status : “1”(closed) or “0” (open). Devices and sensors define the one state as Normal while the other as Alarm. When they are connected to Sensplorer Digital Input module’s port, Alarm and Normal state is assigned with respect to its documentation.

• Sensplorer system is isolated from the foreign device’s outputs to protect itself. Isolation protects the Sensplorer system from unexpected and abnormal signals from the other devices which may damage the whole system
• The LEDs on the module helps people to see the current state of contacts in the field and to intervene immediately.
• It is connected to RS-485 port Sensplorer X/M/L types of Sensplorer Base Modules.
• If the sensor value goes out of the range defined by the system admininistrator;
  1. Users sensor assigned, “if defined”, receive e-mail, SMS, phone call
  2. Sensplorer dashboard shows the status change on dashboard
  3. SNMP / Syslog servers ,”if defined”, receives the traps/messages
  4. SCADA or BMS systems, ,”if defined”, receives the traps/messages
  5. Sensplorer runs the specific rule(s) defined in case of this particular event
  6. All events and sensor’s values are stored in the sensor history database for logging or reporting purpose in the future