Sensplorer Earth-Neutral Voltage Sensor

The Sensplorer Earth-Neutral Voltage
Sensor measures and monitors the RMS voltage between earth and neutral of power line.

• The voltage measurement provides a continuous earthing quality of power line.
• Four treshold values are assigned to the sensor which Sensplorer alerts when exceeded up or down.
• It is connected to the sensor ports on the Sensplorer-X/M/S base modules or Sensplorer Sensor Hub Module by using CAT5 / 6 UTP cable. The module receives its energy via this UTP connection, no seperate power supply is required.
• The maximum distance of sensor module to base and hub can be extended up to 200 meters.
• If the sensor value goes out of the range defined by the system admininistrator;
  1. Users sensor assigned, “if defined”,  receive e-mail, SMS, phone call
  2. Sensplorer dashboard shows the status change on dashboard
  3. SNMP / Syslog servers ,”if defined”, receives the traps/messages
  4. SCADA or BMS systems, ,”if defined”, receives the traps/messages
  5. Sensplorer runs the specific rule(s) defined in case of this particular event
  6. All events and sensor’s values are stored in the sensor history database for logging or reporting purpose in the future