Sensplorer AC Current Sensor

The Sensplorer AC RMS Current Sensor measures and monitors the RMS current of the load.

• The sensor works with up to 5A load currents.
• The sensor works with the current transformers to monitor higher load currents.
• Four treshold values are assigned to the sensor which Sensplorer alerts when exceeded up or down.
• It is connected to the sensor ports on the Sensplorer-X/M/S base modules or Sensplorer Sensor Hub Module by using CAT5 / 6 UTP cable. The module receives its energy via this UTP connection, no seperate power supply is required.
• The maximum distance of sensor module to base and hub can be extended up to 200 meters.
• If the sensor value goes out of the range defined by the system admininistrator;
  1. Users sensor assigned, “if defined”, receive e-mail, SMS, phone call
  2. Sensplorer dashboard shows the status change on dashboard
  3. SNMP / Syslog servers ,”if defined”, receives the traps/messages
  4. SCADA or BMS systems, ,”if defined”, receives the traps/messages
  5. Sensplorer runs the specific rule(s) defined in case of this particular event
  6. All events and sensor’s values are stored in the sensor history database for logging or reporting purpose in the future